Products

22″ Epoxy Coated Roller Drawer Slide, FR 1921

$4.67

Availability: 25 in stock

Buy Save
Drawer Slides 10 - 19 5%
Drawer Slides 20 - 99 10%
Drawer Slides 100 + 15%

Fulterer LogoThe Fulterer FR 1921 550mm/22″ Epoxy Coated, Roller, Parital Extension Drawer Slides are ideal for kitchen cabinets, furniture and other woodworking projects. 

The rails are made from cold rolled steel, with a white powder coat finish. Economical, with good running qualities thru precision nylon rollers and smooth epoxy coating.  The cabinet profiles specially formed to prevent rollers from touching any protruding screws. Long gravity self-closing ramp on all four profiles assures perpendicular closing action. The FR 1921 is suitable for furniture, RTA and kitchen cabinet applications

The captive guide rail running the full drawer extension ensures excellent on-track precision. Available in White. Length: 550mm (21.65″) Extension Loss: 105mm (4.13″) Weight Capacity: 75 lbs. KCMA (34kg.) Installation Width: 12.5 mm (0.49 in.) is the actual width of the slide. Allow a min. of 13 mm (0.51 in.) for clearance.

Features & Specifications of the Fulterer FR1921 550mm/22″ drawer slides. 

Features

  • Made of White Powder Coated Cold Rolled Steel
  • System 32 compatible hole locations
  • Precision nylon rollers
  • Lift-Out drawer removal
    What’s Included
    4 Drawer rails enough for 1 drawer.





    Specifications Fulterer FR 1921 Specifications (1 MB PDF file)

    More Help Drawer Slide Terms
    Series More: Fulterer FR1921
    More Fulterer View More Fulterer Products

    Email Support Email Technical support for Drawer Slides

  • Weight 1.77 lbs
    Dimensions 25 × 5 × 5 in
    Manufacturer

    Extension

    Weight Class

    Type

    Travel

    Soft Close

    Manufactured in

    Height

    Installation width

    Unit of Measure

    Extension Loss

    Disconnect Type

    Disconnet

    Color

    Closed Length

    Model Number

    70059

    You may also like…

    • CFXP05012R2Z

      5 x 1/2 Screws, Flat Phillips, Zinc, 100/bag

      Rated 0 out of 5
      $4.75

      These Screws are ideal for use with our Epoxy Coated Drawer Slides, Mounting Brackets, and many other cabinet hardware applications. 100 per pack.

    • MFXP05012R2Z

      5 x 1/2 Screws, Flat Phillips, Zinc, 1000/bag

      Rated 0 out of 5
      $14.53

      These Screws are ideal for use with our Epoxy Coated Drawer Slides, Mounting Brackets, and many other cabinet hardware applications. 1000 per pack.

    • 900171

      FR1921 Rear Mounting Socket Long

      $1.72

      *NEW* 4″ long Rear Mounting socket for face frame mounting the Fulterer FR 1921 epoxy coated roller slides

    1 review for 22″ Epoxy Coated Roller Drawer Slide, FR 1921

    1. Paul (verified owner)

      Excellent Value for the $$
      I didn't buy these expecting all the bells & whistles of the expensive ball-bearing slides. I bought these because I'm replacing an old array of 7 drawer cabinets (3/4" particle board), with 6 drawer stacks using 7/16 OSB for my garage/shop. Probably 72 drawers by time I'm done. Cost is my primary concern. The old cabinet had fancy slides that got all messed up despite being 'superior' in rating, and ridiculous in price. Based on the 'feel' of the parts, I think the '75lb class' rating is not only exceedingly optimistic, I think it's unreasonable, unless 'acceptable' performance & lifetime operation of the drawer is only a few dozen to a hundred times to failure is somehow OK. Will the parts hold 75 lbs in the closed position? Yes! Without a doubt. Will 75lbs quickly crush the wheels in the fully open position? Yes. Without a doubt! Would buy again? Yes. Delivery: Arrived on time.

    Add a review

    Your email address will not be published.

    Customer Testimonials

    Related Products

    Products