Products

20″ Drawer Slides, 220 lb. Heavy Duty, Full Extension

$61.84

Availability: 5 in stock

Buy Save
Heavy Duty Drawer Slides 3 - 4 5%
Heavy Duty Drawer Slides 5 - 14 10%
Heavy Duty Drawer Slides 15 - 59 13%
Heavy Duty Drawer Slides 60 + 15%

The Hawthorne & Reid HR2054200001 20″ heavy duty drawer slides have a 220 lb. weight capacity. They have a 1” over travel to allow extra access to the back of the drawer. The center member has a channel to allow clearance for a pan head screw to be used to attach the cabinet member to the cabinet.

 

Each section of the slide is made from zinc plated, 2 mm thick, cold rolled steel. The large, high precision ball bearings are enclosed in a steel ball bearing cage for maximum durability. A thick hard rubber bumper will absorb heavy impacts from slamming drawers for years to come. The bumper also holds the drawer closed.

 

The HR2054 heavy duty glide requires 3/4” of installation width on each side of the drawer. You should make your drawers 1-9/16” smaller than the cabinet opening, which allows 1/32” on each side for expansion and contraction and not bind your drawer. The lever release for this non-handed drawer slide will point up or down depending on whether the slide is mounted on the left or right side.

 

Price is per pair, screws not included.

Features & Specifications of this 20” Heavy Duty Drawer Slide

Features

  • 1″ over travel.
  • 2 mm thick cold rolled steel.
  • Lever releases to remove drawer.
  • High precision ball bearings.
  • Hat channel to allow pan head screws in cabinet member.




    More Help Drawer Slide Terms



    Email Support Email Technical support for Drawer Slides

  • Weight 15 lbs
    Dimensions 26 × 3 × 2 in
    Manufacturer

    Unit of Measure

    Closed Length

    Extension

    Height

    Installation width

    Travel

    Type

    Model Number

    HR2054200001

    You may also like…

    • BPXP10034R2N

      10 x 3/4 Screw, Pan Head Phillips, Nickel, Ctn

      Rated 0 out of 5
      $268.52

      These Screws are ideal for attaching hinges, mounting plates, drawer slides and other large hardware to cabinets. Deep threads work well with hardwoods, softwoods, particleboard and MDF. 9000 per Carton.

    • MPXP10034R2N

      10 x 3/4 Screw, Pan Head Phillips, Nickel. 1000/pack

      Rated 0 out of 5
      $36.68

      These Screws are ideal for attaching hinges, mounting plates, drawer slides and other large hardware to cabinets. Deep threads work well with hardwoods, softwoods, particleboard and MDF. 1000 per pack.

    • CPXP10034R2N

      10 x 3/4 Screw, Pan Head Phillips, Nickel. 100/pack

      $7.95

      These Screws are ideal for attaching hinges, mounting plates, drawer slides and other large hardware to cabinets. Deep threads work well with hardwoods, softwoods, particleboard and MDF. 100 per pack.

    1 review for 20″ Drawer Slides, 220 lb. Heavy Duty, Full Extension

    1. George Whittaker (verified owner)

      Quality and good pricing
      I installed these with no issues and they hold the weight I intended for them with ease. I made a seat inside a pull out drawer in our RV and these worked great. I'm 200 lbs and they don't even bend slightly when I sit.

    Add a review

    Your email address will not be published.

    Customer Testimonials

    Related Products

    Products