The Hettich KA3320 56″ drawer slides are a heavy duty, telescoping, precision, full extension drawer slides for high loads, up to 500 lb. capacity, with cushioned in and out stops. Chromated steel. Ball bearing spacers are made of noise-absorbing plastic with hardened steel ball bearings.
The runner and ball race form a single non-detachable unit. Smooth action and high side stability through precision slide. The 56 inch drawer runner is not removable. You will need to unscrew the drawer from the runner to remove the drawer box. The reason for this is with 56 inches of travel to its fully extended 112 inch length, the weight of the loaded drawer acheives a great deal of momentum and must come to an abrupt stop. A lever release would need to be massive and would be expensive and hard to fit into the slide mechanism.
This 56″ slide has a 3/4″ installation Width and is 3″ in height. The recommended fastener is a #10 pan head screw. Screw length will vary depending on application. Use all screw holes to achieve full load rating.
PRICE IS PER PAIR. Screws not included.
Manufactured by Hettich America, in Buford, GA, USA.
Features & Specifications of Hettich, 03320-056-44, 56″ Heavy Duty Drawer Slides, Full Extension
1 pair of non-handed slides (enough for 1 drawer)
Warranty Hettich America Warranty
Specifications Hettich KA3320 Specifications, Brochure & Instructions (515 kb PDF file)