Products

42″ Drawer Slides, Heavy Duty, Full Extension

$230.48

Buy Save
Heavy Duty Drawer Slides 3 - 4 5%
Heavy Duty Drawer Slides 5 - 14 10%
Heavy Duty Drawer Slides 15 - 59 13%
Heavy Duty Drawer Slides 60 + 15%

Hettich Logo

This item has been discontinued by the manufacturer. No more stock is available.

The Hettich KA3320 42″ drawer slides are a heavy duty, telescoping, precision, full extension drawer slides for high loads, up to 500 lb. capacity, with cushioned in and out stops. Chromated steel. Ball bearing spacers are made of noise-absorbing plastic with hardened steel ball bearings. 
 

The runner and ball race form a single non-detachable unit. Smooth action and high side stability through precision slide. The 42 inch drawer runner is not removable. You will need to unscrew the drawer from the runner to remove the drawer box. The reason for this is with 42 inches of travel to its fully extended 84 inch length, the weight of the loaded drawer acheives a great deal of momentum and must come to an abrupt stop. A lever release would need to be massive and would be expensive and hard to fit into the slide mechanism.

 

This 42″ slide has a 3/4″ installation Width and is 3″ in height. The recommended fastener is a #10 pan head screw. Screw length will vary depending on application. Use all screw holes to achieve full load rating.

 PRICE IS PER PAIR. Screws not included.

 Manufactured by Hettich America, in Buford, GA, USA.

Features & Specifications of Hettich, 03320-042-44, 42″ Drawer Slides, Heavy Duty, Full Extension

Features

  • 3320 Drawer Slide 42" bulk w/o screws Pregalv.
  • Up to 500 lb. Load Capacity
  • 3/4" Required Each Side For Installlation
  • Full extension
  • Industrial Applications
     




  • Specifications Hettich KA3320 Specifications, Brochure & Instructions (515 kb PDF file)

    More Help Drawer Slide Terms
    Series See more: Hettich KA 3320 Heavy Duty

    More Hettich View More Hettich Products
    Email Support Email Technical support for Drawer Slides

    Weight 28 lbs
    Dimensions 44 × 3 × 2 in
    Manufacturer

    Installation width

    Weight Class

    Type

    Travel

    Soft Close

    Manufactured in

    Height

    Unit of Measure

    Extension

    Extension Loss

    Disconnect Type

    Disconnet

    Color

    Closed Length

    Model Number

    03320-042-44

    You may also like…

    • BPXP10034R2N

      10 x 3/4 Screw, Pan Head Phillips, Nickel, Ctn

      Rated 0 out of 5
      $268.52

      These Screws are ideal for attaching hinges, mounting plates, drawer slides and other large hardware to cabinets. Deep threads work well with hardwoods, softwoods, particleboard and MDF. 9000 per Carton.

    • CPXP10034R2N

      10 x 3/4 Screw, Pan Head Phillips, Nickel. 100/pack

      $7.95

      These Screws are ideal for attaching hinges, mounting plates, drawer slides and other large hardware to cabinets. Deep threads work well with hardwoods, softwoods, particleboard and MDF. 100 per pack.

    • MPXP10034R2N

      10 x 3/4 Screw, Pan Head Phillips, Nickel. 1000/pack

      Rated 0 out of 5
      $36.68

      These Screws are ideal for attaching hinges, mounting plates, drawer slides and other large hardware to cabinets. Deep threads work well with hardwoods, softwoods, particleboard and MDF. 1000 per pack.

    2 reviews for 42″ Drawer Slides, Heavy Duty, Full Extension

    1. Cheryl McFadden (verified owner)

      Sliding Kitchen Unit for Van
      We created a sliding kitchen unit for our van to use for camping. The unit is approximately 49" wide and 42" long, which is the length of our drawer slides. It contains a campers oven, two unit sink and an apartment sized refrigerator. We also constructed two storage units for pots, pans, dishes and other kitchen utensils that are on the slide as well. When it is fully slid out, the entire unit is out of the back of the van for use. When pushed back in, it slides in underneath our bed unit. The slides are made of quality construction and were easy to mount onto the aluminum frame that we constructed. I would estimate the weight on the unit is approximate 200 pounds. The supports handle it without any undo stress like sagging or flexing. I would rate this as a great product.

    2. darrin f mccollum (verified owner)

      42 drawer slides HD
      work perfect, fast delivery

    Add a review

    Your email address will not be published.

    Customer Testimonials

    Related Products

    Products