32″ Drawer Slides, Heavy Duty, Full Extension


Buy Save
Heavy Duty Drawer Slides 3 - 4 5%
Heavy Duty Drawer Slides 5 - 14 10%
Heavy Duty Drawer Slides 15 - 59 13%
Heavy Duty Drawer Slides 60 + 15%

Hettich Logo

The Hettich 03320-032-44, 32″ drawer slides are a telescoping precision full extension drawer slide designed for high loads, up to 500 lb. capacity, with cushioned in and out stops. The zinc plated steel runner and ball race form a single non-detachable unit. The 32 inch drawer runner is not removable. You will need to unscrew the drawer from the runner to remove the drawer box. The reason for this is with 32 inches of travel to its fully extended 64 inch length, the weight of the loaded drawer acheives a great deal of momentum and must come to an abrupt stop. A lever release would need to be massive and would be expensive and hard to fit into the slide mechanism. Smooth action and high side stability through precision slide. Ball spacers made of noise-absorbing plastic with hardened steel balls.


3/4″ Installation Width – 3″ Height. Tested Weight Capacity 380 lbs. @ 10,000 Cycles – 274 lbs. @ 75,000 Cycles. Cabinet member requires #10 Flat head countersunk screw. Drawer member requires #10 pan head screw. Screw length will vary depending on application. Use all screw holes to acheive full load rating.


PRICE IS PER PAIR. Screws not included.


Manufactured by Hettich America, in Buford, GA, USA.

Features & Specifications of Hettich, 03320-032-44, 32″ Drawer Slides, Heavy Duty, Full Extension



  • 3320 Drawer Slide 32" bulk w/o screws Pregalv.
  • Up to 500 lb. Load Capacity
  • 3/4" Required Each Side For Installlation
  • Full extension
  • Industrial Applications

  • Specifications Hettich KA3320 Specifications, Brochure & Instructions (515 kb PDF file)

    More Help Drawer Slide Terms
    Series See more: Hettich KA 3320 Heavy Duty

    More Hettich View More Hettich Products
    Email Support Email Technical support for Drawer Slides

    Weight 21 lbs
    Dimensions 34 × 3 × 2 in

    Installation width

    Weight Class



    Soft Close

    Manufactured in


    Unit of Measure


    Extension Loss

    Disconnect Type



    Closed Length

    Model Number


    You may also like…

    1 review for 32″ Drawer Slides, Heavy Duty, Full Extension

    1. david K krannich (verified owner)

      32 " slides
      Very nicely built heave duty slides. Going to use them mounted parallel on a wall to hold and move a barn type door where a trolley system will not work. haven't done it yet but these hinges will easily hold a 50 # door. I'm pleased with the price compared to some of the more precision units that I do not need.

    Add a review

    Your email address will not be published.

    Customer Testimonials

    Related Products