Products

30″ Drawer Slides, 220 lb. Heavy Duty, Full Extension

$92.76

Availability: 6 in stock

Buy Save
Heavy Duty Drawer Slides 3 - 4 5%
Heavy Duty Drawer Slides 5 - 14 10%
Heavy Duty Drawer Slides 15 - 59 13%
Heavy Duty Drawer Slides 60 + 15%

The Hawthorne & Reid HR2054300001 30″ heavy duty drawer slides have a 220 lb. weight capacity. They have a 1” over travel to allow extra access to the back of the drawer. The center member has a channel to allow clearance for a pan head screw to be used to attach the cabinet member to the cabinet.

 

Each section of the slide is made from zinc plated, 2 mm thick, cold rolled steel. The large, high precision ball bearings are enclosed in a steel ball bearing cage for maximum durability. A thick hard rubber bumper will absorb heavy impacts from slamming drawers for years to come. The bumper also holds the drawer closed.

 

The HR2054 heavy duty glide requires 3/4” of installation width on each side of the drawer. You should make your drawers 1-9/16” smaller than the cabinet opening, which allows 1/32” on each side for expansion and contraction and not bind your drawer. The lever release for this non-handed drawer slide will point up or down depending on whether the slide is mounted on the left or right side.

 

Price is per pair, screws not included.

Features & Specifications of this 30” Heavy Duty Drawer Slide

Features

  • 1″ over travel.
  • 2 mm thick cold rolled steel.
  • Lever releases to remove drawer.
  • High precision ball bearings.
  • Hat channel to allow pan head screws in cabinet member.




    More Help Drawer Slide Terms



    Email Support Email Technical support for Drawer Slides

  • Weight 11 lbs
    Dimensions 32 × 3 × 2 in
    Manufacturer

    Unit of Measure

    Closed Length

    Extension

    Height

    Installation width

    Travel

    Type

    Model Number

    HR2054300001

    You may also like…

    • CPXP08034R2Z

      #8 x 3/4 Screw, Pan Head Phillips, Zinc, 100/Bag

      $6.45

      These Screws are ideal for use with Drawer Slides or our Face Frame Hinges to attach the hinge to the face frame. Also the Intermat Face Frame Mounting Plates, and many other cabinet hardware applications. 100 per pack.

    3 reviews for 30″ Drawer Slides, 220 lb. Heavy Duty, Full Extension

    1. Bob (verified owner)

      Heavy duty
      Good solid slide. I didn't need the 220 lb capacity but I really like these industrial duty slides. They are shipped without screws so you need some no 8 and no 10 screws to mount. Use all 4 screws in each side of the drawer

    2. Tim Horst (verified owner)

      30" Drawer Slides, 220 lb. Heavy Duty, Full Extension
      30" Drawer Slides, 220 lb. Heavy Duty, Full Extension. Great slide great slide

    3. Tom Todd (verified owner)

      Great slides
      I needed some long-reach slides and these do the job. They’re easy to install and provide great support even when fully extended. I’m not putting anything close to the weight limit, but a heavy KitchenAid mixer is no problem for them.

    Add a review

    Your email address will not be published.

    Customer Testimonials

    Related Products

    Products